The B12-5B, B15-2A, B15-2B & B15-2BR batteries are designed to power high-speed and other digital cameras: Phantom, Redlake, Photron, DRS, Weinberger etc.  B-15's are also ideal to power 16mm high-speed film cameras and accessory lights.

Environmental considerations are defined by model designations.  For example: 2A models are suitable for general field and laboratory applications and with stand shock environments up to 15-g's.  The 2B models are ruggedized for Hi-g applications up to 100g's and re supplied with a heavy-duty 3/8" base plate with threaded mounting holes; metric and SAE.

The B15-2BR battery includes a built-in solid-state remote control circuit that handles short duration current demands up to 30-amps.  A user supplied DC voltage and/or contact closure triggers the remote circuit to switch power ON/OFF.   Remote cable lengths up to one-mile are acceptable between the battery and the remote locations.

A fully charged B15-2A or 2B battery will simultaneously power up to three (3) typical high-speed digital cameras for approximately 15-minutes.  If the cameras are in a low power standby mode one battery will supply power fore several hours.

	(PDF) Model B12-5B 12 Volt Battery Pack
	Model B15-2A 30 Volt Battery Pack (not shown above)
	(PDF) Model B15-2B 30 Volt Battery Pack
	(PDF) Model B15-2BR 30 Volt Battery Pack (with Single Channel Remote Control)

Featuring:

• High Performance Sealed Lead-Acid Cells
• Designed Specifically for Hi-Speed Cameras, Video & Film
• High Current Discharge for Short Duration
• Multiple Film Roll Capacity
• Operates in Severe Temperatures
• Rugged Construction for Hi-g environments
• Long Life - No Memory Retention

All battery packs are available with optional solid-state built-in remote control circuitry

an internationally approved 3-pin power entry receptacle is utilized with a built-in fuse holder that accepts 5 x 20mm metric fuses.  All charger use electrical components that meet major international standards and are CE approved.

Most commercial batteries and chargers are high volume production products. Not so with these batteries and chargers. Strict quality control, assembly and test procedure assure that each battery and charger meet defined performance specifications. For example, each battery is tested and certified to charge & discharge times at specific voltage levels and must meet this criteria. 

The result is a power source that is unequalled in the high-speed camera industry for reliability. The careful integration of battery and charger designs assure; long battery life and low cost over the life of the pack, usually 5 years or longer.