 |
|
| If you use High-Speed Cameras, Film or Video, V.I.L. can help to protect your equipment from possible damage do to explosions, flash fires, water, dust, and other harsh environments. Our Engineering staff is available for assistance with custom designed enclosures to meet your requirements. |
|
MODEL CPH-5100 CAMERA PROTECTIVE ENCLOSURE This enclosure is designed to accept the Locam 16mm hi-speed camera with B15-2AL battery packs and EDMS and HDRS data recording systems. Internal insulation and heat resistant white paint protect the camera from flash temperatures up to 1,000 degrees Fahrenheit for the duration of 30 seconds. Gaskets and O-ring, seal the housing from water spray, sand and dust from all directions. An internal hole pattern accepts the QD-5 quick-release mount in multiple fore and aft positions. Weight is approximately 25 pounds. Milliken, Photosonics 1PL and 4ML cameras can also be accommodated within the CPH-5100. |
||
|
|
 |
|
|
| S00270
Mount as shown
This family of precision mount accept various video cameras and telephoto lenses from 200mm to 1200mm. Critical bore-sight alignment is easily accomplished , as the selected bore-sight will not move when azimuth & elevation locks are tightened. One 360° rotation of azimuth and elevation screws move bore-sight alignment 1°, when a 2/3" video camera with 1000mm telephoto lens is used. A QD-5 quick release mount, mating camera dovetail plate and lens support hardware is supplied. When ordering provide mechanical detail on specific cameras and lenses. |
Specifications
|
|
|
|
|
S00270 with Weather Protective Cover |
Azimuth and Elevation Adjustments |
Last Update 5-17-2004
